MIL-C-O052980C(ME)
Matching
All bolts, nuts, and
screws shall be correctly torqued.
thread areas securing
bolts or capscrews shall be of sufficient
Bolts shall
strength to withstand
the tensile strength of the bolt.
not extend more than
5 threads outward from their associated nuts.
Rivets shall fill the holes
3.28.4 Riveted connections.
completely.
The upset rivet heads shall be full, neatly made,
concentric with the rivet holes, and in full contact with the
surface of the member and shall be in accordance with SAE J492.
3.28.5 Machine work.
Tolerances and gauges for metal fits shall
conform to the limitation specified herein.
4.
QUALITY
ASSURANCE
PROVISIONS
Unless otherwise specified in
4.1 Responsibility for inspection.
the contract or purchase order, the contractor is responsible for
the performance of all inspection requirements as specified herein.
Except as otherwise specified in the contract or purchase order and
unless disapproved by the Government, the contractor's own
facilities or any other, suitable for the performance of the
The
inspection requirements specified herein, may be used.
Government reserves the right to perform any of the inspections set
forth in the specification where such inspections are deemed
necessary to assure supplies and services conform to prescribed
requirements.
4.1.1 Responsibility for compliance.
All items must meet all
requirements of sections 3 and 5.
The inspection set forth in this
specification shall become a part of the contractor's overall
The absence of any inspection
inspection system or quality program.
requirements in the specification shall not relieve the contractor
of the responsibility of assuring that all products or supplies
submitted to the Government for acceptance comply with all
Sampling in quality conformance does
requirements of the contract.
not authorize submission of known defective material, either
indicated or actual, nor does it commit the Government to acceptance
of defective material.
4.1.2 Component and material inspection.
The contractor is
responsible for ensuring that components and materials are
manufactured, examined, and tested in accordance with referenced
specifications and standards, as applicable.
4.2 Classification of inspections.
The inspection
requirements
specified herein are classified as follows:
First article inspection (see 4.3).
Quality conformance inspection (see 4.4).
Inspection of packaging (see 4.6).
First article inspection.
4.3
23
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business