MIL-C-0052980C(ME)
3.25.5 Batteries.
Storage batteries and battery box shall be
furnished in accordance with MIL-STD-141O.
3.25.6 Fuel tank. A fuel tank as specified in 3.26.3 shall be
provided, except that the tank shall be sufficient capacity for
8 hours of operation at rated capacity.
3.25.7 Belts.
All drive belts and fan belts shall conform to
MIL-B-11040.
3.25.8 Control devices. The engine shall be provided with a high
cylinder-head temperature device, set to automatically stop the
engine in the event of excessive cylinder-head temperatures. The
control device shall be set so that the head temperature specified
in MIL-STD-1300 shall not be exceeded.
A control panel shall be provided for the
3.25.9 Control Panel.
class 4, size 15 cfm, winterized compressor with all compressor
gauges, meters, valves, switches, and other operator controls as
The control panel shall be located within the
specified herein.
enclosure, shall be shock-mounted, and shall be accessible through a
watertight, hinged cover or sufficient size to expose all controls
opening of the control panel cover shall
and instruments when open.
Each
not vent the engine and compressor unit compartment.
instrument, meter and control device shall be identified by a
nameplate or by legible lettering on its face. All gauges and
A schematic airflow
meters shall be uniformly flush mounted.
diagram, operating instructions, and safety precautions shall be
attached to the panel or control panel cover, so as to be visible to
The
the operator when the control panel is in the open position.
control panel shall include the following equipment:
a.
Oil pressure gauge (for engine having forced-feed
lubrication above 15 psig).
Ammeter.
Fuel gauge, liquid level.
Engine hour meter.
e.
Starter and ignition switches.
Throttle and choke, or governor controls.
f.
Temperature gauge, engine oil, indicating.
g.
h.
Pressure gauge, discharge air pressure (psig).
Pressure gauge, compressor lubricating oil pressure (psig)
i.
(if forced feed lubricated).
When specified (see 6.2), the
3.25.10 Fuels and lubricants.
winterized class 4, size 15 cfm compressor shall be serviced prior
to shipment with military lubricants and greases as specified in
table II:
18
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business